Blink camera flashing red

You’re probably used to seeing the blinking green light on your security camera. That means it’s recording. But what if you see a red light instead? Is your camera broken?

Don’t panic! It’s probably in night mode. This article will explain what red light means on your Blink camera and how to switch it back to green.

Blink camera flashing red

Common Causes of a Red-Flashing Blink Camera

One of the most common problems people have with their Blink cameras is when they start flashing red. Several different things can cause this, and it’s important to troubleshoot the problem to get your camera working properly again.

Here are some of the most common causes of a red-flashing Blink camera:

Low Battery 

A low battery is one of the most common causes of a blinking red light on a Blink camera. If your camera blinks red, make sure it’s plugged in and has a full charge.

 Syncing Issues

 If your Blink camera isn’t syncing properly with your phone or computer, it may flash red. Make sure that you’re following the instructions for syncing your camera correctly.

Camera malfunction

In some cases, the camera may malfunction and need to be replaced.

How to Know if You Need a New Blink Battery

When the Blink camera flashes red, the battery runs low and needs to be replaced.

Luckily, it’s easy to know when you need a new Blink battery. The camera will start flashing red every few seconds when the battery is getting low. This is your cue to replace the battery as soon as possible, so you can continue using your Blink camera without interruption.

How to Reset the Blink Camera

If your Blink camera is flashing red, it’s experiencing some issues. Luckily, there’s an easy way to reset it.

  Frigidaire affinity washer reset

First, unplug the camera from its power source. Then, press and hold the power button on the back of the camera for 10 seconds. After that, release the button and plug the camera back in. Once it’s reconnected, wait for it to boot up and check to see if the problem is resolved.

Troubleshooting Steps for Red Flashes on Your Camera

If your Blink camera is flashing red, it could mean many things. But no matter the cause, there are a few simple steps you can take to troubleshoot the issue.

The first thing to do is ensure the device is connected to power and charged. If that doesn’t work, you should reset the device by pressing and holding the Sync button for 10 seconds.

Then, take a look at your Wi-Fi connection. Make sure that your router is turned on and running smoothly. To rule out any problems with your router, try rebooting it. If that doesn’t work, you can turn off your router and wait for it to reset overnight.

Finally, if none of these solutions works, try checking for potential software updates for your Blink camera and app. That should do the trick!

Where to Find More Information About Your Blink Camera

If the red light is flashing on your Blink camera, research more about what this could indicate. The best place to look for more information is online, either through the Blink support website or on forums dedicated to Blink cameras and related topics.

The official website includes troubleshooting guides and FAQs that can answer some of your questions. Additionally, many knowledgeable users have shared their experiences and helpful tips on various forums, so check out these resources.

You can also contact Blink’s customer service team directly if you need more information or personalized help troubleshooting your camera. Their contact information is easily accessible on their website, so don’t hesitate to contact them if you need assistance.

FAQs on Blink Cameras With Red Flashes

Do you have questions about the red flashes of your Blink camera? You’re not alone! Here are some common FAQs about a Blink camera flashing red.

  How to Remove Spray Paint From Concrete

Q: What does it mean when my Blink camera is flashing red? 

Usually, this means the battery is low on power or the connection between your device and camera has been lost. If you don’t see any motion alerts, try recharging your camera or reconnecting it to the app.

Q:  How do I extend my battery life? 

 Keep your camera updated with the latest firmware installed, which can help improve battery life. You should also use a rechargeable battery for optimal performance; this will save you money in the long run because you don’t have to buy new ones every time.

Q: Why are both of my cameras flashing red? 

If both of your cameras are flashing red simultaneously, this may be due to an issue with your home’s Wi-Fi router or a weak wireless connection. Try resetting your router and reconnecting your cameras again.

Conclusion

When your Blink camera is flashing red, it is having trouble connecting to the internet. You can do a few things to try to fix this problem, and we’ll outline them in this article.

First, ensure that your Blink camera is plugged in and the power is on. If it’s plugged in, the emphasis is on, and the problem persists, try restarting your modem and your Blink camera. 

You may need to call Blink customer support if that doesn’t work. We hope this article was helpful and that you can now get your Blink camera up and running again.

Leave a Comment