Frigidaire Dishwasher Not Draining

You’ve just cleaned a mountain of dishes, and now your dishwasher won’t drain properly, leaving you with a mess and mountains of dishes again. What do you do?

We’re here to help. Below we’ll walk you through how to diagnose and repair a Frigidaire dishwasher that needs to be drained.

Troubleshooting DIY Tips for a Frigidaire Dishwasher Not Draining

You may notice the water isn’t draining from your dishwasher. This is a common issue and can be caused by various things.

Don’t worry, though. You can troubleshoot this issue and fix it without calling a technician. Here are a few tips:

First, check to see if anything is blocking the drain. Remove any food or debris that might be caught in there.

Next, make sure the dishwasher is properly seated. Sometimes the dishwasher can move out of place, and that can stop the water from draining.

Finally, check to see if the dishwasher is getting enough power. You should replace the fuse or reset the breaker if it’s not.

What Causes a Frigidaire Dishwasher Not to Drain?

A few different things can cause a Frigidaire dishwasher not to drain. The three most common causes are a clogged drain, a defective pump, or a broken motor.

If your dishwasher isn’t draining, the first thing you should do is check the clogged drain. This is the easiest and most common problem to fix. You can clear the clog using a plunger or a plumber’s snake or call a professional to do it for you.

If the clog isn’t the problem, the next step is checking the pump. The pump pushes the water out of the dishwasher and into the drain. If the pump is defective, it won’t be able to push the water out, which will cause the dishwasher to not drain.

Finally, if the pump and clog are both working properly, the problem could be with the motor. If the motor is broken, it won’t be able to power the pump, which will also cause the dishwasher to not drain.

How to Clean Out Drain Parts of a Frigidaire Dishwasher

It’s important to clean out the drain parts of your dishwasher regularly. This will help keep them clear and functioning properly.

  How do I reset my LG refrigerator ice maker

To clean out the drain parts of your Frigidaire dishwasher, you’ll need the following:

  1. A bucket
  2. A screwdriver
  3. Pliers
  4. A flashlight

To clean out the drain parts of your Frigidaire dishwasher, follow these steps:

Step 1: Unplug your dishwasher.

Step 2: Fill a bucket with hot, soapy water.

Step 3: Remove the screwdriver from the drain cover and use it to pry off the cover.

Step 4: Use the pliers to remove the hair trap from the drain.

Step 5: Shine a flashlight into the drain to see if any debris is blocking it.

Step 6: If debris blocks the drain, use the screwdriver to remove it.

Step 7: Put the hair trap back and replace the cover.

Step 8: Plug in your dishwasher and cycle using hot, soapy water.

Are Hoses a Common Cause for a Frigidaire Dishwasher Not Draining?

The dishwasher hoses can often cause a Frigidaire dishwasher not to drain. To check the hoses, you’ll want to ensure there are no kinks in them, ensuring that water can flow freely in and out. You can also use a damp cloth to clean off any lint or dirt buildup around the connections.

Another thing worth checking is the inlet valve. To test it, start by unplugging the power and then turning off the water supply. Next, you’ll want to locate the valve by tracing back your dishwasher’s feed lines and then remove it with a wrench.

Finally, please give it a visual inspection and a good rinse under running water. If it’s cracked or severely corroded, replace it with a new one.

How to Replace the Drain Pump in a Frigidaire Dishwasher

Once you’ve determined the cause of the problem, it’s time to start addressing it. If you need to replace the drain pump in your Frigidaire dishwasher, you’ll want to ensure you have all the necessary tools ready.

You can find a replacement pump at most appliance stores and online retailers. Once you’ve got the new pump, it’s time to begin the repair process. First, you’ll need to open up the dishwasher and locate the old pump.

Unscrew any clamps or connectors holding it in place, and then disconnect any connected hoses. You can then dispose of the old pump and put in your new one by following the same steps in reverse.

Ensure all hoses are securely connected and everything is properly installed before closing up your dishwasher. Once that’s done, give it a test run and check for any signs of leakage around or near the drain hose connections – if everything is sealed tightly, your Frigidaire dishwasher should be back up and running like a charm!

  Ge microwave fan wont turn off

Frequently Asked Questions on Frigidaire Dishwasher Not Draining

Are you wondering if you can fix your Frigidaire dishwasher not draining yourself or if you need to call a professional? You’re in luck — it’s possible that you can repair it yourself. Here are a few questions to get started.

First, is your dishwasher clogged? If the drain line is blocked by debris, such as food chunks, cutlery, or broken glass, then the water won’t be able to leave. If this is the case, remove the debris and run the dishwasher again.

Second, do you notice that the pump motor isn’t pumping? It could be due to a faulty overload switch or motor overload relay — in which case, you’ll need to replace the part. Finally, if there are no signs of electrical issues, then check for a stuck float switch. If that’s what’s causing your issue, dislodge it and try running the dishwasher again.


So if your dishwasher isn’t draining, there’s a good chance it’s clogged. Luckily, this is an easy fix that you can do yourself.

All you need to do is clear the drain hose of any debris or food particles that may be causing the blockage. You can do this by removing the hose and using a hose cleaner or a length of wire to clean it out.

Once the drain hose is clear, please put it back in place and run the dishwasher again. If it still doesn’t drain, you may need to call a technician to help you diagnose and repair the problem.

Latest posts by YellowFeverEats (see all)

Leave a Comment