Frigidaire Dishwasher Start Button Not Working

You push the start button on your Frigidaire dishwasher, and nothing happens. You might be wondering what to do now. Don’t worry; we’re here to help. Below are some troubleshooting tips that might help you fix your dishwasher start button.

Identifying the Problem With Your Frigidaire Dishwasher Start Button

If your Frigidaire dishwasher start button isn’t working, you first need to determine what’s causing the problem. Here are a few things you can check:

  • The power is on, and the dishwasher is properly plugged in
  • The water is turned on, and the dishwasher is properly connected to the drainage system
  • The dishwasher is not overloaded with dishes
  • The dishwasher is not jammed with food or dishes

If you’ve ruled out all of these potential problems, the start button is likely damaged or defective. In this case, you’ll need to replace it.

Check the Wires and Electrical Connections

If your Frigidaire dishwasher start button isn’t working, the first thing you’re going to want to do is to check the wires and electrical connections. Ensure all the wires are properly connected, and there is no damage to the wiring. If you see any damage, you’ll need to replace the wire.

You should also check the electrical outlet to ensure it’s working properly. If it’s not, you’ll need to replace the outlet. Once you’ve checked the wiring and electrical connections and they appear to be in good condition, move on to the next step.

Reset the Dishwasher Circuits

If your dishwasher start button isn’t working, you can try resetting the circuits. Here’s how:

  1. Unplug the dishwasher or trip the breaker.
  2. Remove the lower kickplate.
  3. Locate the red reset button on the dishwasher control module.
  4. Push and hold the reset button for 10 seconds.
  5. Plug in or flip the breaker back on.
  6. Replace the lower kickplate.
  7. Try to start the dishwasher.
  Larson storm door retractable screen replacement parts

Determine if There Is a Blockage

If the start button on your Frigidaire dishwasher is still not working, you may need to check for blockage. The start button can be blocked by something like a piece of food or even lint or dirt. You’ll need to take apart the machine and inspect each component to check for blockage.

Start by unplugging the machine and ensuring you wear protective gloves and eyewear. Locate the start button and check that no obstructions are blocking it. Then inspect all other parts in the machine, including the various hoses, filters, drains, and valves.

You may even have to get a flashlight and go over them with a fine-toothed comb! If you find something blocking the button or any of these components, remove it and reassemble your dishwasher. Plug it back in and cross your fingers that the start button will work now.

Replace the Start Button on Your Frigidaire Dishwasher

If the start button isn’t responding, then the first thing you want to do is check the wires that connect it. If they look okay, the next step is replacing the switch itself. This can be done in a couple of steps.

First, you’ll need to shut the power to your dishwasher. You can either unplug it from the wall or turn off the circuit breaker. Then, you’ll need to remove the old start button by unscrewing it from the dishwasher panel and disconnecting any wires connected to it.

After that, you’ll need a replacement start button for your Frigidaire dishwasher. Make sure that it’s designed specifically for that model before you buy it, as different Frigidaire dishwashers have other parts.

Once you have the part in hand, connect it reverse to how you removed the old one and turn on the power again. And just like that, your Frigidaire dishwasher start button should be up and running!

How to Troubleshoot Further When Your Frigidaire Dishwasher Start Button Still Doesn’t Work

If you’ve tried the steps above and your Dishwasher Start Button still isn’t working, don’t panic! There are a few things you can do to troubleshoot further.

  Frigidaire stackable washer dryer troubleshooting

First, ensure you’ve disconnected the appliance from the power supply and check inside the control panel for any loose connections. If everything looks good, it might be time to dive deeper and poke around in the wiring. This is tricky, so it might be best to call in a professional.

Another method of troubleshooting is resetting your dishwasher. To do this, unplug it from its power source and wait five minutes before plugging it back in again. This should reset all internal settings, so your start button should work again after the reset.

If all else fails, it’s time to replace the dishwasher start button itself! This, too, can be tricky so if you need more confidence in doing this on your own, consider getting professional help rather than risking potential damage or electric shock.

Conclusion

So if your dishwasher start button isn’t working, you know what to do. Remember to unplug it before you start, and be careful with the wires. And if, for some reason, you can’t fix the dishwasher start button yourself, be sure to call a professional.

YellowFeverEats
Latest posts by YellowFeverEats (see all)

Leave a Comment