GE refrigerator control panel reset

Hey, you! Yes, you, the one with the GE refrigerator. The control panel on the front is a bit of a mystery. It’s okay; we’re not here to judge. We’re here to help. Below, we’ll show you how to reset your GE refrigerator control panel.

GE refrigerator control panel reset

What Are the Steps to Reset a GE Refrigerator Control Panel?

Are you having trouble with your GE refrigerator control panel? If so, don’t worry; we’re here to help. This article will walk you through the steps to reset the panel.

First, locate the circuit breaker that controls your refrigerator and switch it off. (If you need help determining which breaker is for your fridge, consult your owner’s manual or the label on the refrigerator itself.)

Once the circuit breaker is off, wait for about five minutes. This will give the fridge enough time to cool down.

Once it’s cooled down, turn the circuit breaker back on and wait for the fridge to come back on.

Next, locate the Control Panel Reset button on your GE refrigerator. It’s a small, circular button near the panel’s top.

Once you’ve found it, press and hold the button for three seconds, the control panel will reset, and your fridge will start up again.

How Do I Select the Options?

Control panels on refrigerators are not all created equal. The GE refrigerator control panel reset is one of the most user-friendly ones we have encountered. The first thing you want to do is locate the power button. This is the large, round button in the lower right-hand corner of the panel. It is labeled with a red dot.

Once you have found the power button, locate the other buttons around it. The controls are all labeled with pictures, making selecting the option you want easy. You can choose the ice maker, water dispenser, and temperature. If you have any questions about what a certain button does, hover your mouse over the button, and a small window will appear with a description of what that button does.

  Why the Keurig Descaling Light Stays On

What Happens if I Don’t Remember My Code?

If you don’t remember your code, you can reset it by pressing and holding the two buttons on the control panel simultaneously for six seconds. This will erase all your settings, and you’ll have to set them up again.

So, if you ever find yourself in this situation, don’t worry; it’s not the end of the world. Just take a deep breath and reset your control panel.

How Do I Check the Temperature Settings on My Refrigerator?

The temperature settings on your refrigerator can be adjusted depending on the type of food you’re storing or if you just want to ensure your items stay cold enough.

To check the settings, start by pressing the Temperature button. The LCD screen should show a number that represents the refrigerator temperature.

If the temperature is too high or low, you can adjust it using the+ and – buttons until you reach an acceptable level. Generally, a good starting point is 37°F for the fridge and 0°F for the freezer. You’ll then need to press and hold the Temperature button for 3 seconds to save your new settings. And then you’re done!

Are There Any Special Features on My Refrigerator That Require Resetting?

If you have a specific feature like an alarm or filter reset, then it’s important to check your refrigerator’s manual for instructions. Some features may require a separate reset, such as the icemaker, Sabbath mode, and door alarm.

For example, if you have a GE refrigerator with an Advanced Water Filtration System, you may need to reset the filter light after replacing the filter. Hold the Filter Reset button on your refrigerator’s control panel for three seconds. Your light will start blinking when it’s connected properly.

You can also reset child lock settings by pressing and holding the Door Alarm/Reset button on your control panel for three seconds. If your refrigerator has a Sabbath mode, it must be manually turned off after each use to ensure that certain features are restored.

Tips for Troubleshooting GE Refrigerators

If you’ve tried all the steps above and your GE refrigerator control panel still isn’t working, here are some tips for troubleshooting your fridge.

  Whirlpool Washer Door Locked Light Flashing

First, make sure the power supply is working. Check if your refrigerator is plugged in and all related circuit breakers are in the ON position. If your power supply is working properly and the control panel still won’t turn on, you may need to reset the control panel. To reset a GE refrigerator control panel, press and hold the Lighting/Lockout/Reset button for at least 10 seconds until the display lights up again.

Alternatively, if you haven’t already checked it, try replacing the main power cord. This can help with fridge problems when all else has failed. Finally, if none of these tips work or you find yourself running into too many problems with your GE refrigerator control panel again, it might be time to call a professional for help!


So if your GE refrigerator control panel is not working, or if you’re having any other problems with your fridge, the first step is to do a factory reset. This will clear all the settings and restore the fridge to its default condition. Once the reset is complete, you can start setting up the fridge again and see if that fixes the problem.

If the reset doesn’t fix the problem, you may need to call a technician to come and take a look at your fridge. There could be a problem with the wiring or the control panel, and the technician will be able to fix it.

Leave a Comment