GE Refrigerator Water Not Working

You’ve been keeping a close eye on your water usage, and we’re sure you were mindful of the amount of water your GE refrigerator used daily. But all of a sudden, your water stopped working.

Before you freak out and run to the store to buy a new refrigerator, take a deep breath and read these simple tips. We’ll help you troubleshoot the issue and get your water back up and running in no time.

Get Your Ge Refrigerator Water Working Again With These Simple Tips

Check the Filter

The first step is to check the filter. If it’s dirty, it could cause the water to not flow properly. If it’s clogged, the water won’t be able to go through, and you’ll have to replace it.

Look for a Clog

If your water isn’t working, the first thing you should do is check for a clog. Just locate the water line and unscrew the cap. Once the water’s off, use a plunger to clear any obstruction.

You’ll need to get a little more hands-on if that doesn’t work. Shut off the water supply line and disconnect the inlet hose from the back of the refrigerator.

Take the hose to a sink and run water through it. If it’s still clogged, use a wire hanger to clear it. Reconnect everything and turn on the water—you should be good to go.

Make Sure the Line Is On

It’s possible that your water isn’t working because the line isn’t on. To make sure, check to see if the water dispenser is turned off. If it is, turn it on and see if the water starts flowing.

If you have a water filter, ensure it’s in place and the filter lock is released. You’ll also want to check the couplings on either side of the filter for leaks. If you have a water line connected to your refrigerator, check to see if it’s pushed in all the way.

  FiOS Remote Not Working

Inspect the Water Line

Checking the water line is important in diagnosing why your GE refrigerator water isn’t working. First, unplug the fridge and locate the water inlet valve. This is usually near the back but can also be underneath it.

Next, disconnect the hose and check for any visible signs of damage or clogs. You can also use a multitester to see if there’s power going to the valve—if not, it’s likely due to a faulty connection or wiring issue. You might need to call a professional for help if that’s the case.

Check both ends of the hose for any signs of clogs as well. You can use a flexible rod to push through any blockages, but if you can’t remove them, you may need to replace the hoses entirely—hopefully, you get lucky, and that’s all it takes!

Reset the Icemaker

If the water dispenser isn’t working, try resetting the icemaker. This is a handy trick that often works, and it’s really simple. You must unplug the refrigerator for a few minutes, plug it back in, and then hold down the reset button on your GE refrigerator’s ice maker.

Make sure to hold the button down for at least 10 seconds, as this will reset the entire system and give you a fresh start. You might also want to check and ensure there’s no clog in your water line. If there is, it could prevent the water from getting to the dispenser.

Clean Out Water Ports and Filter

If you’re still having trouble getting your GE refrigerator’s water and ice to work, it might be time to clean the ports and filter. This can be tricky, so before you start, turn off the power to the refrigerator, unplugging it if necessary.

  How to Make Coffee Without a Filter

Once the power is off, locate the water filter. Most GE refrigerators have two ports in the back of the unit that looks like a hole or small opening. Take a damp cloth or sponge and wipe away any dirt or debris that may have built up in these ports.

Then take out the water filter and give it a good cleaning. You can use warm water and soap or white vinegar for this step. If there is any rust or corrosion on the filter, use a brush to remove it. Once everything is clean, put everything back together and plug in your refrigerator!


So if your GE refrigerator water isn’t working, the good news is that you can probably fix the issue without too much trouble. Just follow these simple tips, and you should be able to get your water flowing again in no time.

Latest posts by YellowFeverEats (see all)

Leave a Comment