How to Bypass Start Relay on Refrigerator

You know the drill when it comes to your refrigerator. When you want to cool something down, you must wait for the compressor to start and run its course. But what if there was a way to short-circuit that process?

Believe it or not, there is a way to bypass the start relay on your fridge and get it up and running without all the waiting. In this article, we’ll walk you through the steps involved in doing just that.

Understanding the Start Relay

Your refrigerator’s start relay is an important part of its overall function. It supplies power to the compressor and starts the cooling process. If it fails, your refrigerator will stop working altogether.

Fortunately, there are a few things you can do to bypass the start relay and get your fridge up and running again. In this step-by-step guide, we’ll walk you through the process.

First, locate the start relay on your refrigerator. It’s usually a small, cylindrical component located near the compressor.

Next, remove the cover panel from the back of the fridge and locate the start relay. It should be in the upper-left corner of the unit.

Now, use a screwdriver to remove the screws that hold the start relay in place. Be careful not to damage any of the wiring or components surrounding it.

Once the relay is free, disconnect it from the wiring harness and replace it with a new one. Connect it properly, or you could damage your fridge further.

Reattach the cover panel and screws, plug in your refrigerator and test it to ensure it’s working properly.

How to Check if the Start Relay Is Working

Before you start troubleshooting, it’s important to check whether the start relay is the problem. To do this, you’ll need to check whether the compressor is running. Here’s how:

  1. Unplug your refrigerator or turn off the power at the breaker box.
  2. Remove the cover from the compressor (usually located in the back of the refrigerator).
  3. Look for a small cylindrical object with two wires coming out of it. This is the start relay.
  4. Check to see if the compressor is running. If it is, the start relay is likely not the issue, and you should proceed to Step 3 below.
  Frigidaire affinity washer reset

Preparing to Bypass the Start Relay

To bypass the start relay, you will need to prepare by removing the cover of your refrigerator.

Once you have removed the cover, locate the start relay. It is usually a small, cylindrical component located near the compressor.

Disconnect the wires from the start relay and remove them from the refrigerator.

Steps to Bypass the Start Relay

Once you’ve located the start relay, you can start the bypass process. It’s important to turn off all power to the refrigerator before you begin working with wires, so make sure your fridge is unplugged as a precaution.

The next step is to locate the capillary tube, which is usually connected to the bottom of the start relay and contains a refrigerant that helps cool down your fridge. Carefully slide this tube out of its housing and set it aside.

Now it’s time to completely connect the two wires from the compressor to bypass the relay. If you don’t want to do this permanently, you can use insulated wire nuts instead of soldering, giving you more flexibility for future repairs if necessary.

Once you have all your connections set up, plug in your fridge and test it out. If everything works correctly and gravity seems to have held off successfully, then congratulations—you did it!

Troubleshooting Common Problems When Bypassing

It may be due to a few common issues if you’re having trouble bypassing your start relay. One of the most common issues is that the start relay isn’t compatible with your particular refrigerator model. In this case, you’ll need to buy a different start relay compatible with your refrigerator.

Another issue you may encounter is that the capacitors aren’t properly connected. If this is the case, check that all of the capacitors are firmly connected and if they need to be replaced, be sure to buy ones specifically designed for your refrigerator model.

Lastly, you might find that your motor runs, but there’s no cooling. This could mean an issue with your compressor or fan motor coil, so now might be a good time to call an expert technician for help.

Important Safety Precautions When Bypassing the Start Relay

Taking the proper safety precautions when bypassing the start relay is essential. The most important one is to unplug the refrigerator before beginning any work and ensure that you are comfortable with what you are doing to prevent accidents or harm.

  GE Profile Refrigerator Not Cooling

Another important thing is to turn off the power to the refrigerator before beginning any work and ensure that all capacitors and other electrical components are not live. It’s also important to wear insulated gloves, safety glasses, and clothing to protect yourself from electric shock.

Finally, when it comes time to connect the jumpers, ensure all wires are connected securely and properly, and no exposed wires can be seen. If there’s any doubt, don’t mess with it—it’s time to call a professional if you can’t figure out how to safely connect these components.


If you’re at your wit’s end and feel ready to toss your fridge out the window, don’t worry—we’ve got you covered. We’ve put together a simple, step-by-step guide on bypassing the start relay on your refrigerator, so you can get your appliance up and running without having to call in a professional.

Follow these simple steps, and you’ll be good to go in no time:

  1. Unplug your refrigerator.
  2. Remove the cover to the start relay.
  3. Locate the start relay and disconnect the wires.
  4. Connect the wires in the following order: blue, black, and red.
  5. Replace the cover with the start relay and plug in your refrigerator.
  6. Test your refrigerator to make sure it’s running properly.

And that’s it! You’ve successfully bypassed the start relay on your refrigerator and can now use it without any problems.

Latest posts by YellowFeverEats (see all)

Leave a Comment