How To Reset The GE Refrigerator Control Board?

General Electric has some of the best appliances in the industry when it comes to home and kitchenware. Especially a refrigerator that is capable of dispensing a hot cup of coffee and brewing it for you in no time.

These sorts of innovative solutions bring about the best kind of products that provide great ease of use and make things easier and more manageable for the consumers.

GE refrigerator is of a unique design and comes with some of the best features. From the water dispensing to the Keurig coffee maker installed in the fridge ready to brew you some hot cup of coffee any time of the day with just a click of a button.

The water dispensing and the ice-making units work perfectly well with the design of the door and it certainly is a classy addition to any household.

However, with a technologically advanced machine comes its own set of problems. For instance, the assembly that is responsible for delivering the coffee or the control board may stop working.

And you may feel like you are left with your own devices to resolve the problem hence we are here to help you figure out how to reset the GE refrigerator control board.

How to reset a GE refrigerator control board?

There are not many ways to reset the GE refrigerator however following are some methods that can be implemented.

Turn off the power supply:

One of the first and most sure-fire ways to reset any appliance is to turn off the power supply. All you need to do is turn off the main circuit breaker and the appliance. You need to unplug it as well just to make sure that any residue current does not pass through to the appliance.

  Whirlpool Duet Dryer troubleshooting

After turning the appliance off and unplugging it. It is advisable to wait a couple of minutes. The general rule would be to wait for 30 seconds but it doesn’t hurt to wait longer and let the refrigerator be completely turned off. Then start by plugging the appliance back into the circuit breaker and switching on the power.

Then turn the refrigerator on. Make sure the water valves are open and running and that the water supply is sufficient. After that turn on the GE refrigerator control panel and see if that works. This should generally make the control board reset and make it work.

The control panel reset:

If the GE refrigerator’s control panel is not displaying properly there may be several reasons behind it and it’s best to use some of the following practices. In case none of these work your best bet would be to call the helpline and try to talk to them to understand the problem better. Anyways let’s see if we can find a way to fix it ourselves first.

  1. Issues with power supply
  2. Door malfunction
  3. Temperature control
  4. Replace with new

Let’s take a deep dive and understand what may be wrong with it.

Issues with the power supply:

Sometimes during transportation or otherwise the circuits can become loose or fused due to either lack of voltage or excessive voltage. To fix this issue you will have to unplug and remove the control panel from the refrigerator. Remove the panel finds wires that connect with the panel and see if there are any issues with them.

If there is a fuse or a wire is disconnected carefully connect it back. Now place the control panel back inside the refrigerator and plug the appliance back in. now see the control board should be getting the ample amount of power supply that should turn it on.

  How To Reset A Honeywell Thermostat?

Door malfunction:

Door malfunction is a common problem that causes a lot of issues with refrigerators. Hence it’s best to take a deep look at the door and make sure it is closing and working properly. Sometimes the hinges can become loose or the gasket may be demagnetized. To make sure none of these issues are occurring check if the door closes properly or the seal is intact.

If the seal is not intact and is not magnetized then it will have to be re-magnetized. Or else you can get it replaced with a new one. Also, make sure that the door doesn’t have any obstruction that may be causing it to stay open and overrunning various parts of the assembly.

Temperature control:

Temperature control is a key aspect of the refrigerator and you need to ensure that the refrigerator is working on the best temperature settings. In order to make that happen, you need the assistance of the control panel.

And sometimes due to issues with the temperature the control panel can get damaged. Hence look for the temperature control settings at the back of the food compartment and set it from there. See if that helps with the control panel.

Replace with new:

If none of the options mentioned above work then there is a chance that the problem runs deeper than just the control panel so to make it work. You will not have a choice but to get it replaced.


There are only some ways you can resolve this issue yourself as the technological advancement in these products and appliances means a lot of assembly aspects that we cannot tackle on our own.

  How to protect glass top stove from cast iron?

Hence if you do run into such a problem, your first step should always be to see if you have a warranty. That can help make your life a lot easier as they can replace the broken part or even the entire unit if need be.

Also when performing any of these tests do take the necessary precautions to ensure that you do not get electrocuted in the process. Furthermore, there is one more way you can seek help and that is by calling the helpline of the manufacturer.

Generally, they can provide guidance and sometimes are even willing to send over a technician to take a look at the problem. If you can get it resolved by the manufacturer then there is nothing better than that.

Latest posts by YellowFeverEats (see all)

Leave a Comment