How To Reset Whirlpool Cabrio Touch Screen Washer?

Whirlpool washer is an exceptional new innovative machine that comes with a lot of new and exciting features. This machine not only consists of a fancy LED touch screen but also has other fabulous features to offer.

The washer has multiple temperature settings, adaptive cycle times, and less energy consumption. All of these features come with a machine that does not make as much noise as the typical washers do.

However, despite the latest technology and excellent hardware the machine does need to be reset once in a while to function properly.

To make this easy for you we have enlisted the method to quickly reset the machine and get it to start working again. There are three major steps involved so follow closely.

Whirlpool Cabrio Touch Screen washer reset:

Pull the plug:

To ensure that you not only protect your machine but also other appliances, it’s best to turn off the electricity from the main power supply. You also need to switch the machine off before you pull the plug. This makes sure that the machine is safe and there will not be any short circuits as you perform the reset.

Select the mode:

Selecting the mode is very important. Once your machine is turned off, ensure that you look at all the variety of modes that are available on the machine. You can choose the one that suits your needs the best.

If you do not understand which mode to choose you can always refer to the user manual and see which one makes the most sense. Otherwise, it’s best to just choose the one you see on the screen.

  How to protect glass top stove from cast iron?

Generally, the best practice would be to set it to the normal mode for a test run cycle and resetting purposes.

Dial it up:

Here comes the tricky part. Now you need to work with the dial to make sure you perform the perfect reset. It’s best to start with ensuring that the dial is in its usual position before you begin working with it. So here are the steps mentioned below:

  • Turn the dial counter, anti-clockwise once, meaning the left side
  • Now you need to turn the dial clockwise three times, so three clicks towards the right side
  • Now turn it back to counter-clockwise once, which means one click towards the left
  • And finally, move the dial towards the right meaning clockwise one click.

This should potentially reset the machine to ensure that you have done this correctly. Your next step would be to restart the machine.

Time to start the device:

Now that you have followed all of the above-mentioned steps perfectly now you can restart the device. Do not be afraid to restart the device once or twice. Turning the machine on and off, again and again, will help ensure the reset process was completed successfully.

Now turn the machine on and power it up. Use the start button to turn it on and ensure that the dial is in its correct position as you do that. Once all these things are done it’s now time to restart your machine again. Use the power button to restart the machine.

Reset cycle:

Once you have reset your whirlpool Cabrio it’s best to let it run at least one or two runs to make sure it’s working properly. If you still notice some issues you can try another reset process.

Another reset method:

There is another method available that can help you perform a quick reset of your whirlpool Cabrio touch screen washer. Let us list it down below with the complete procedures you need to follow.

  How To Remove Agitator From GE Washer?

Pause button:

To begin the reset follow the following steps:

  • The pause and cancel button on the machine is the best way to stop and reset the machine. So press the pause/cancel button to reset and stop the washing machine.
  • This will allow the washer to be completely drained of any water.
  • Now press power and turn it off and on a couple of times.
  • Now choose your wash cycle setting. This includes the cycle times and other modifiers so choose wisely.
  • Now press start.

Start:

Pressing the start button should start the cycle. However, if that does not happen, turn the machine off and unplug the main power supply to the machine. Wait a couple of seconds and let it sit.

Now plug it back into to main power supply and start the machine. Now press the start button again with your predetermined cycle options and run it empty once to ensure that it works perfectly.

Control Board:

If the machine shows an error on the screen it means that the control board may be causing some of the problems in the machine. To repair this error, you can switch off the power on the machine and restart the machine.

This will help restart the machine properly and if it still causes some issues it’s best to check the control panel of the machine. If the control panel is not broken you may need to get it replaced.

If you still have a warranty you may be in luck and can take the machine back to the company to get it replaced. Now start the power machine and select the desired settings and make sure that the machine runs its perfect cycle.

  How Long Do Hard Boiled Eggs Last Unrefrigerated?

You can now move to turn the machine back on and off, the machine will run the cycle completely, and this machine after it runs the cycle completely and then it will switch on after 10 minutes and will resolve the issue. Run one or two cycles to make sure the machine works properly without causing any issues.

Conclusion:

Most of these issues can be resolved without hiring a handyman or a technical person. Unless the control panel on the machine is broken and needs replacement you will not have to spend any money. Especially if you still have a warranty.

If you do not have a warranty then the replacement of the control panel is going to cost some. But the resetting of the device is not that much of a big deal and if you follow the steps mentioned above you can do it easily without any hassle.

YellowFeverEats
Latest posts by YellowFeverEats (see all)

Leave a Comment