Kenmore Refrigerator Ice Maker not making ice?

If your Kenmore refrigerator ice maker isn’t making ice, there could be a few potential reasons. First, it’s possible that the machine is not receiving power. If the power cord is plugged in and there’s still no ice coming out of the machine, it might be due to a frozen water line or broken icemaker. If the machine has been working fine for a while but suddenly stopped producing ice, it might be due to a dirty filter or an empty water reservoir. In all cases, fixing the issue will require some basic troubleshooting.

Reset a Kenmore Ice Maker

If your Kenmore refrigerator ice maker isn’t producing ice, there are a few things you can try to reset it. First, make sure the ice maker is plugged in and turned on. Next, open the door to the freezer and remove any food or items that could be blocking the ice maker’s intake. Finally, pour a cup of water into the freezer and wait about two hours for it to freeze. Once frozen, remove it from the freezer and place it against the side of the refrigerator where the ice maker is located. If this doesn’t work, you may need to replace your Kenmore ice maker.

Faulty Water Inlet Valve

If you are experiencing an issue with your Kenmore refrigerator ice maker not producing ice, it is likely that there is a faulty water inlet valve. This valve controls the flow of water into the ice maker and can malfunction if it is not functioning properly. If you notice that the ice maker isn’t producing any ice or is producing very small pieces of ice, it may be time to take your refrigerator in for service.

  Why does my shower drain smell bad?

Wrong Temperature Setting

If you are experiencing an issue with your Kenmore refrigerator ice maker not making ice, it is important to check the temperature setting. Some models have a “defrost” mode that uses less energy and can result in a lower temperature setting. If the ice maker is set to a low or defrost mode, it may not be able to produce enough ice for your needs.

Frozen Evaporator Coils

If your Kenmore refrigerator does not produce ice, it is likely that the evaporator coils are frozen. Freezing of the evaporator coils can cause them to break, which will prevent the refrigerator from producing ice. If you notice that your refrigerator is not producing ice, you can try thawing out the coils by running a fan on them for a few hours or by using a freezer defrost tool.

Broken Door Switch

If your Kenmore refrigerator ice maker is not producing ice, it may be because of a broken door switch. This switch controls the motor that moves the ice maker’s blades. If the switch is broken, the motor will not work and the ice maker will not produce any ice. To test if this is the case, you can try moving the switch manually. If it works fine when moved manually, then it is likely that the switch is broken and needs to be replaced.

Low Water Pressure

If your water pressure is low, it may be due to a number of things. One possibility is that there is a blockage in the system. If you notice that your water pressure has been decreasing over time, it may be worth checking for a blockage. Another possibility is that the water pump has failed. If you notice that your ice maker isn’t making any ice, and the water pressure seems low, it may be worth checking the water pump.

  How to clean sticky wood kitchen cabinets?

Kenmore Icemaker Mold Thermostat

If your Kenmore refrigerator ice maker is not making ice, it may be because the mold thermostat is not working. The mold thermostat controls the temperature of the water in the ice maker and if it is not working, the water will not be cold enough to make ice. You can test to see if the mold thermostat is working by turning it off and on. If the ice maker starts making ice when the mold thermostat is turned off, then it likely needs to be replaced. If the machine does not start making ice when the mold thermostat is turned off, then there may be a problem with another part of the machine.

Refrigerator Leaks Water

If your refrigerator is leaking water, it may be necessary to take it in for service. Unfortunately, this issue is not uncommon and can often be difficult to diagnose. If the water is coming out of the back or side of the refrigerator, it may be a sign that the seal between the refrigerator and freezer is failing. If you notice water dripping from your refrigerator all the time, it may also be indicative of a more serious problem such as a broken water line or leaky sealant. In any case, if you think your refrigerator might be leaking water, it’s best to bring it in for inspection.

Ice Level Control Board

If the ice maker is not making ice, it is likely that the ice level control board is not working. This board controls how much water flows into the ice maker and determines how much ice will be made. If this board is not working, water will continue to flow into the machine and eventually freeze, defeating the purpose of having an ice maker in the first place. If this issue is not resolved, it may be necessary to replace the entire machine.

  How To Reset Whirlpool Cabrio Touch Screen Washer?

Conclusion:

A Kenmore refrigerator that doesn’t have an ice maker can be a great investment, but it can be frustrating when you can’t fix the problem. There are many possible reasons why your refrigerator doesn’t have an ice maker, and we hope this article has helped you find out why yours isn’t working.

YellowFeverEats
Latest posts by YellowFeverEats (see all)

Leave a Comment