Larson storm door retractable screen replacement parts

Replacing a screen on a Larson storm door is a job most homeowners can do themselves. In this article, we’ll show you how to remove the old screen and install the new one.

First, remove the screws that hold the storm door in place. Then, use a pry bar to detach the door from the frame. If the old screen is still attached to the door, cut it loose with a utility knife.

Next, install the new screen by attaching the top and bottom rails to the door. Then, stretch the screen across the opening and attach it to the frame. Finally, reattach the storm door to the frame and replace the screws.

Larson storm door retractable screen replacement parts

What Are the Components of the Larson Storm Door Retractable Screen?

When your Larson storm door retractable screen starts to experience problems, perhaps the screen doesn’t retract, or the mesh starts to tear, you’ll need to replace at least some parts. The components of the Larson storm door retractable screen are:

  • Screen
  • Retracting mechanism
  • Tension springs
  • Screws
  • Hinges

You can purchase these components from Larson or find them at a hardware store. Read the installation instructions carefully, as replacing these parts can be tricky.

Troubleshooting the Larson Storm Door Retractable Screen

If your Larson storm door retractable screen isn’t working, there are a few troubleshooting steps you can take to try to fix the problem.

First, inspect the screen to ensure no debris or dirt is blocking it from moving. If there is, clean it off using a hose or a vacuum cleaner.

Next, check the casing that the screen is attached to. Make sure it’s properly aligned and the screws are tightened securely.

If those steps don’t work, you might need to replace the screen. You can find replacement screens on the Larson website or at a hardware store.

  Fridge Making Rattling Noise

How to Order Replacement Parts for the Larson Storm Door Retractable Screen

Once you have located the replacement parts, it’s time to order them. Note that some parts may be specific to a certain model or year of Larson storm door.

To order, you will need to provide the following information: the part number, the quantity, the distributor’s name, and contact information. The distributor will contact you to confirm the order and provide a delivery date.

Tools Needed to Replace Larson Storm Door Screen Components

Changing out your Larson storm door screen components is a fairly straightforward process, but the catch is that you will need some tools. Depending on the parts you are replacing, you may need a screwdriver, pliers, a drill, and maybe even a hammer.

Check to see if any of the replacement parts come with any tools before you buy them; in this case, it’s always better to be prepared than under-prepared. 

You want to avoid getting caught in the middle of the repair and having to run out to buy something you may have overlooked.

Test the tools on your current components before taking them apart to understand how they fit and operate. That way, when it comes time for replacement, you will have an easier time installing the part correctly and more efficiently.

Step-by-Step Guide to Replacing a Larson Storm Door Retractable Screen

Now that you have the right replacement screen parts, it’s time to start. Here’s a step-by-step guide on how to replace your Larson storm door retractable screen:

  1.     Start by removing the old screen from the door frame, not damaging any of the hardware.
  2.     Next, line up the new screen and secure it into place with the provided screws or bolts.
  3.     Once your new screen is secured, use a Phillips head screwdriver to tension the roller clips so that they fit snuggly against your new screen material.
  4.     You must adjust the tensioner at the top and bottom of each door frame to properly tension your new retractable screen.
  5.     Finally, check that all hardware is secured tightly and that everything fits properly before using your new retractable screen!
  How To Change Water Filter In Whirlpool French Door Refrigerator

Common Issues With a Larson Storm Door Retractable Screen

Replacing the parts of your Larson storm door retractable screen may seem like a daunting task, but it is easier than it looks. Before you start digging into your door, check for any common issues that commonly arise with this type of screen.

First and foremost, you want to ensure that your screen is properly assembled. If it’s loose or not in the correct place, it won’t work properly, and you may need to replace more parts than necessary. 

Another common issue is that your rollers may need lubrication if they are sticking or having trouble rolling. Lastly, check for gaps around the frame that allow air to seep through or any broken wire coils in the spring-loaded mechanism that need replacing.

Making sure all these simple fixes are taken care of will help you avoid buying more replacement parts than necessary and save you time and money in the long run!

Conclusion

When finding replacement parts for your Larson storm door retractable screen, it’s important to know what you’re looking for. We’ve put together this guide to help you find the right parts for your screen.

We’ll walk you through the parts of the retractable screen and show you where to find replacement parts for each one. We’ll also give tips on choosing the right parts for your screen.

So, whether you need to replace a broken screen or want to upgrade your existing screen, we’ve got you covered. Let’s get started!

Leave a Comment