Locked door light flashing on your Whirlpool washer doesn’t have to mean a trip to the service center. Many times, the issue can be resolved without any help at all. Here’s a quick guide on troubleshooting a Whirlpool washer when the door-locked light is flashing.
Overview of the Whirlpool Washer Models With Door-Locked Light Flashing
There are a few Whirlpool washer models that have a door-locked light flashing. This is an indicator that the door is locked and will not open. The washer will continue to try to run its cycle, but it will not complete it.
The following are the models with this indicator light flashing:
Locate the Error Code on the Display
If the door-locked light is flashing, the washer has detected an issue and displays an error code on the screen. You’ll need to locate it on display to determine what that code means.
The error codes are listed in the owner’s manual, but we’ve also compiled them here for your convenience. Please look at the list, find your code, and then match it to the explanation below.
Once you know what the code means, you can take steps to troubleshoot and fix the issue.
Reset the Washer to Default Settings
The machine is in lock mode if the door-locked light is flashing on your Whirlpool washer. To reset the washer to default settings, you’ll need to unplug it for a few minutes.
Once you’ve unplugged the machine, please wait a few minutes and plug it back in. Once it’s turned back on, press and hold the “Wash” button for about three seconds until the light turns off, the machine will start up again and should be back to its default settings.
Troubleshoot Common Issues With Whirlpool Washers
You can try a few things if you’re having issues troubleshooting your Whirlpool Washer when the Door Locked Light is flashing. The first is to check the power source. Make sure that all connections are secure and that the outlet has power. If everything looks okay at the power source, you’ll want to move to the next step.
Next, locate and remove the washer’s drain hose from where it connects to the wall, floor drain, or sink and backfeed it with a garden hose. This will help reduce any build-up in your washer’s drain pump and help your washer operate more efficiently.
Finally, check to ensure that all your washer’s hoses are still connected securely and that there aren’t any signs of damage or wear. If everything looks okay, try unplugging your washer and plugging it back in after five minutes to see if this helps reset it.
Learn to Access and Replace Internal Components of the Washer
If you are still experiencing issues with the door-locked light flashing on your Whirlpool washer, it’s time to move on to the next step. You’ll need to go in and take a look at the internal components of your washer.
You’ll need to unplug the appliance from the wall outlet and remove the washer’s front panel. This will allow access to many components inside the unit, including switches, motors, pulleys, and belts.
Once you have access to these parts, ensure that nothing is broken or out of place. If any of these parts seem compromised, they may need to be replaced for your washer to function properly again.
Tips and Tricks to Prevent Door-Locked Light Flashing in Whirlpool Washers
Are you having trouble with your Whirlpool washer door-locked light flashing? Well, there are some things you can do to help prevent it from happening in the future.
First, ensure the washer lid is completely closed before starting a cycle. This will help ensure the door latches properly and prevent any errors from occurring when the cycle begins. You should also periodically check to see if any items are stuck in the door’s gasket or around its edges preventing it from closing properly.
Second, ensure your load size is adequate for your cycle setting. If the load size is too small, the machine may think that something is blocking its door and will lock itself. If you consistently have issues, reduce your load size and try again.
Finally, if something has gotten stuck on the door latch or in its mechanism and requires some troubleshooting, take advantage of Whirlpool’s customer service team as an option to get more detailed information on how to fix your specific issue quickly and accurately.
If your Whirlpool washer’s door-locked light is flashing, there are a few troubleshooting steps you can take to try to fix the issue. First, ensure that you have the correct model number of your washer and that it is properly plugged in.
If it is plugged in and you have the correct model number, try pressing and holding the cancel button for three seconds to release the door. If the door does not unlock, unplug the washer and call a technician.