How To Fix Whirlpool Washer Door Locked Flashing Light Issue

The whirlpool washing machine is the top-of-the-line washing machine in the market. With some of the best features and the most technologically advanced ones, there are sometimes chances of one or two problems that can occur.

Here we are going to be talking about the whirlpool washer door locked flashing light. This is a problem that can occur with both the top loader and the front loader.

So as an owner of any of these models, you can face this particular issue. Hence we wanted to help you out by sharing some advice on how to fix your whirlpool washer door locked flashing light.

Some issues that you may need to look into:

Whirlpool Washer Door Locked Flashing Light

Broken lid switch:

The Whirlpool washer comes with the latest technologies and the best part is that while it’s all automatic, it also gives out the functionality to work without the control panel as well.

And you have the ability to open and close the door to end cycles and take out your clothes. However, if the washer door-locked flashing light is on and you need to understand what is causing that issue, you will have to take a deeper look.

The broken lid switch can be somewhat of an issue as the door needs to be closed properly before the cycle can begin or end for that matter. To reset your machine and open the door to check the lid switch by placing a screwdriver into the switch actuator.

You can press down the switch actuator to see if it holds the well, and the light stops blinking, this means your switch might need to be replaced with a new one.

  What is the effect of oven cleaner on kitchen countertops?

Broken actuator motor:

A broken actuator motor or an issue with the wiring can also cause this issue. This issue will cause the motor from starting to work properly and a broken actuator will motor is generally not because the motor itself is broken, instead sometimes the wiring and the connections around it can be damaged or burnt and can cause some trouble.

Hence to fix this issue you need to open up the wiring connection and see for any damage to the actuator motor or the wire connections that surround it. While you do this you can also see if the wires are properly connected to the actuator and you can tweak them while you have the latch open.

Clogged drain pipe:

Believe it or not some of the most common issues and problems happen because of the drainpipe being clogged. Hence to resolve this issue it’s best to open up the main drain pipe.

The assembly of the drainpipe is very simple. All you need to do is start by unscrewing the drain pump which opens in a counterclockwise rotation.

However, when doing so make sure to place a bucket to catch any residue water, as there is going to be at least 2 gallons worth of water in there. Now all you need to do is, remove the drain pipe and run some water at full stream through it. This will get rid of any clogging in the drain pipe.

Another way the flashing door light issue can be resolved is by inserting vinegar and water solution into the drain pipe and letting it run. This will help remove any clogging from the drain pipe and clean it from the inside. Hence, resolving the flashing door light issue in your washer.

  How to clean sticky wood kitchen cabinets?

Water hose kinks or bends:

These are issues that can restrict the water flow into the machine which can also be a major cause for the malfunctioning of the door lock. As it does not receive an adequate amount of water coming into the machine and can cause the door to remain locked and the light flash.

Hence, when facing such an issue its best to remove the water hose from behind the washer and let the water drip out in a bucket and then replace the hose on the washer making sure that there are no kinks or bends in the pipe that will make sure that the water flow inside the pipe can remain consistent and the machine can function properly.

Door Switch issues:

Issues with the door switch can also be a reason that will cause your light to flash on top of the machine. Hence, to prevent this you will need to run some diagnostics on it to check if it works properly. There is actually no repairing solution to this problem. All you can really do is remove the door switch and replace it with a new one.


These are some of the things that can be done by you to resolve some of the issues. However, if the issues are more deeply rooted you may need to call the repair company or try to take your machine in for a warranty repair. As these machines come with a long warranty life you can always come back for a quick repair.

Nevertheless, most of these issues can be resolved by yourself as well if you have a few bits of knowledge on how the technical side of things works. Needing to get it repaired may not be necessary at all, in case you do not have a warranty and are stuck with spending money on a repairman to fix the issues.

  Why is the Samsung dryer not heating?

All these issues can cause the flashing light to go off on the machine. As the washers, these days are very technologically advanced and with an automatic door locking system to prevent flooding or any other issues.

Even issues that are not directly related to the door can cause the door locking system to be activated. Hence when facing this door locking issue you need to keep in mind that there can be a lot of reasons that may be causing it.

Latest posts by YellowFeverEats (see all)

Leave a Comment